Hangars Bindoon

1 x 12x12x3.4 with lean-to

1 x 12x12x3.4

WE OFFER SHEDS AND HANGARS WITH UP TO 12M SPAN RHS WELDED TRUSSES OR 12M RHS PORTAL FRAME.

 

We have developed a very strong RHS fully welded truss and RHS portal framed shed here in Perth for Perth and WA region A & B . The next logical step was to extend this to hangars. The doors run past the sheds on outriggers and this way give a gull width opening giving access for light aeroplanes and gyrocopters. Check out some of the jobs displayed below and please have a look at the truss to column connection or the lean-to to column/truss connection. No builders straps used as wall braces, but solid 3mm flatbar. Check out those concrete footings and you'll understand why these sheds can go to Geraldton as a region B shed.

We do not engineer to an absolute minimum, these are over engineered and tough.

 

Come and talk to one of our consultants to see how we can help you.

 

 

 

Hangar Frame Bindoon
press to zoom
Hangar + lean to Frame for Bindoon
press to zoom
Hangar Bindoon with lean-to
press to zoom
Hangar Bindoon outrigger
press to zoom
Hangar Bindoon WA with Lean-to
press to zoom
Hangar 2 Bindoon Frame
press to zoom
Hangar Bindoon colum to truss connection
press to zoom
Hangar 2 Bindoon inside.jpg
press to zoom
Hangar 2 Outrigger.jpg
press to zoom
1/1